Crystal, v.2
: build addmult_1_in.sim
[0:00.1u 0:00.1s 26k]
: : clear
[0:00.0u 0:00.0s 35k]
: inputs ain ASEL
[0:00.0u 0:00.0s 35k]
: outputs aout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: ph1 (see gate at -334,180)
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
Node isn't driven: -ph1 (see gate at -298,180)
Node isn't driven: -MRESET (see gate at -280,180)
Node isn't driven: -OP0 (see gate at -232,180)
Node isn't driven: OP0 (see gate at -226,180)
Node isn't driven: -OP4 (see gate at -192,180)
Node isn't driven: OP4 (see gate at -198,180)
[0:00.0u 0:00.0s 35k]
: delay ASEL -1 0
(3 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node aout is driven low at 1.83ns
      ...through fet at (-156, 180) to GND after
    inv_2/a is driven high at 1.15ns
      ...through fet at (-168, 190) to Vdd after
    ASEL is driven low at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs ain ASEL
[0:00.0u 0:00.0s 35k]
: outputs aout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: ph1 (see gate at -334,180)
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
Node isn't driven: -ph1 (see gate at -298,180)
Node isn't driven: -MRESET (see gate at -280,180)
Node isn't driven: -OP0 (see gate at -232,180)
Node isn't driven: OP0 (see gate at -226,180)
Node isn't driven: -OP4 (see gate at -192,180)
Node isn't driven: OP4 (see gate at -198,180)
[0:00.0u 0:00.0s 35k]
: delay ASEL 0 -1
(3 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node aout is driven high at 2.98ns
      ...through fet at (-156, 190) to Vdd after
    inv_2/a is driven low at 2.30ns
      ...through fet at (-168, 180) to nand_2_1/6_14_20#
      ...through fet at (-174, 180) to GND after
    ASEL is driven high at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs ain ASEL
[0:00.0u 0:00.0s 35k]
: outputs aout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: ph1 (see gate at -334,180)
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
Node isn't driven: -ph1 (see gate at -298,180)
Node isn't driven: -MRESET (see gate at -280,180)
Node isn't driven: -OP0 (see gate at -232,180)
Node isn't driven: OP0 (see gate at -226,180)
Node isn't driven: -OP4 (see gate at -192,180)
Node isn't driven: OP4 (see gate at -198,180)
[0:00.0u 0:00.0s 35k]
: delay ain -1 0
(3 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node aout is driven low at 1.83ns
      ...through fet at (-156, 180) to GND after
    inv_2/a is driven high at 1.15ns
      ...through fet at (-174, 190) to Vdd after
    ain is driven low at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs ain ASEL
[0:00.0u 0:00.0s 35k]
: outputs aout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: ph1 (see gate at -334,180)
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
Node isn't driven: -ph1 (see gate at -298,180)
Node isn't driven: -MRESET (see gate at -280,180)
Node isn't driven: -OP0 (see gate at -232,180)
Node isn't driven: OP0 (see gate at -226,180)
Node isn't driven: -OP4 (see gate at -192,180)
Node isn't driven: OP4 (see gate at -198,180)
[0:00.0u 0:00.0s 35k]
: delay ain 0 -1
(4 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node aout is driven high at 3.37ns
      ...through fet at (-156, 190) to Vdd after
    inv_2/a is driven low at 2.70ns
      ...through fet at (-168, 180) to nand_2_1/6_14_20#
      ...through fet at (-174, 180) to GND after
    ain is driven high at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs bin fsum ph1 -ph1 OP0 -OP0 OP4 -OP4 -MRESET
[0:00.0u 0:00.0s 35k]
: outputs bout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
No flow through FET: g=dlatch_1/inv_0[1]/a, s=GND, d=fsum, loc=-310,180
No flow through FET: g=dlatch_1/inv_0[1]/a, s=Vdd, d=fsum, loc=-310,190
[0:00.0u 0:00.0s 35k]
: set 0 ph1
[0:00.0u 0:00.0s 35k]
: set 1 -ph1
[0:00.0u 0:00.0s 35k]
: set 0 OP0
[0:00.0u 0:00.0s 35k]
: set 1 -OP0
[0:00.0u 0:00.0s 35k]
: set 1 OP4
[0:00.0u 0:00.0s 35k]
: set 0 -OP4
[0:00.0u 0:00.0s 35k]
: delay bin -1 0
(8 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node bout is driven low at 5.91ns
      ...through fet at (-198, 190) to mux_1_5/in1
      ...through fet at (-232, 190) to bin after
    bin is driven low at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs bin fsum ph1 -ph1 OP0 -OP0 OP4 -OP4 -MRESET
[0:00.0u 0:00.0s 35k]
: outputs bout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
No flow through FET: g=dlatch_1/inv_0[1]/a, s=GND, d=fsum, loc=-310,180
No flow through FET: g=dlatch_1/inv_0[1]/a, s=Vdd, d=fsum, loc=-310,190
[0:00.0u 0:00.0s 35k]
: set 0 ph1
[0:00.0u 0:00.0s 35k]
: set 1 -ph1
[0:00.0u 0:00.0s 35k]
: set 0 OP0
[0:00.0u 0:00.0s 35k]
: set 1 -OP0
[0:00.0u 0:00.0s 35k]
: set 1 OP4
[0:00.0u 0:00.0s 35k]
: set 0 -OP4
[0:00.0u 0:00.0s 35k]
: delay bin 0 -1
(4 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node bout is driven high at 11.16ns
      ...through fet at (-198, 180) to mux_1_5/in1
      ...through fet at (-232, 180) to bin after
    bin is driven high at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs bin fsum ph1 -ph1 OP0 -OP0 OP4 -OP4 -MRESET
[0:00.0u 0:00.0s 35k]
: outputs bout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
No flow through FET: g=dlatch_1/inv_0[1]/a, s=GND, d=fsum, loc=-310,180
No flow through FET: g=dlatch_1/inv_0[1]/a, s=Vdd, d=fsum, loc=-310,190
[0:00.0u 0:00.0s 35k]
: set 0 ph1
[0:00.0u 0:00.0s 35k]
: set 1 -ph1
[0:00.0u 0:00.0s 35k]
: set 1 OP0
[0:00.0u 0:00.0s 35k]
: set 0 -OP0
[0:00.0u 0:00.0s 35k]
: set 1 OP4
[0:00.0u 0:00.0s 35k]
: set 0 -OP4
[0:00.0u 0:00.0s 35k]
: delay bin -1 0
(4 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node bout is driven high at 15.77ns
      ...through fet at (-198, 180) to mux_1_5/in1
      ...through fet at (-226, 180) to inv_1/z
      ...through fet at (-256, 190) to Vdd after
    bin is driven low at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs bin fsum ph1 -ph1 OP0 -OP0 OP4 -OP4 -MRESET
[0:00.0u 0:00.0s 35k]
: outputs bout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
No flow through FET: g=dlatch_1/inv_0[1]/a, s=GND, d=fsum, loc=-310,180
No flow through FET: g=dlatch_1/inv_0[1]/a, s=Vdd, d=fsum, loc=-310,190
[0:00.0u 0:00.0s 35k]
: set 0 ph1
[0:00.0u 0:00.0s 35k]
: set 1 -ph1
[0:00.0u 0:00.0s 35k]
: set 1 OP0
[0:00.0u 0:00.0s 35k]
: set 0 -OP0
[0:00.0u 0:00.0s 35k]
: set 1 OP4
[0:00.0u 0:00.0s 35k]
: set 0 -OP4
[0:00.0u 0:00.0s 35k]
: delay bin 0 -1
(8 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node bout is driven low at 10.66ns
      ...through fet at (-198, 190) to mux_1_5/in1
      ...through fet at (-226, 190) to inv_1/z
      ...through fet at (-256, 180) to GND after
    bin is driven high at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs bin fsum ph1 -ph1 OP0 -OP0 OP4 -OP4 -MRESET
[0:00.0u 0:00.0s 35k]
: outputs bout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
No flow through FET: g=dlatch_1/inv_0[1]/a, s=GND, d=fsum, loc=-310,180
No flow through FET: g=dlatch_1/inv_0[1]/a, s=Vdd, d=fsum, loc=-310,190
[0:00.0u 0:00.0s 35k]
: set 0 ph1
[0:00.0u 0:00.0s 35k]
: set 1 -ph1
[0:00.0u 0:00.0s 35k]
: set 0 OP4
[0:00.0u 0:00.0s 35k]
: set 1 -OP4
[0:00.0u 0:00.0s 35k]
: delay -MRESET -1 0
(5 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node bout is driven low at 6.23ns
      ...through fet at (-192, 190) to inv_3/z
      ...through fet at (-268, 180) to GND after
    inv_3/a is driven high at 1.15ns
      ...through fet at (-280, 190) to Vdd after
    -MRESET is driven low at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs bin fsum ph1 -ph1 OP0 -OP0 OP4 -OP4 -MRESET
[0:00.0u 0:00.0s 35k]
: outputs bout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
No flow through FET: g=dlatch_1/inv_0[1]/a, s=GND, d=fsum, loc=-310,180
No flow through FET: g=dlatch_1/inv_0[1]/a, s=Vdd, d=fsum, loc=-310,190
[0:00.0u 0:00.0s 35k]
: set 0 ph1
[0:00.0u 0:00.0s 35k]
: set 1 -ph1
[0:00.0u 0:00.0s 35k]
: set 0 OP4
[0:00.0u 0:00.0s 35k]
: set 1 -OP4
[0:00.0u 0:00.0s 35k]
: delay -MRESET 0 -1
(4 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node bout is driven high at 8.55ns
      ...through fet at (-192, 180) to inv_3/z
      ...through fet at (-268, 190) to Vdd after
    inv_3/a is driven low at 2.30ns
      ...through fet at (-280, 180) to nand_2_2/6_14_20#
      ...through fet at (-286, 180) to GND after
    -MRESET is driven high at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs bin fsum ph1 -ph1 OP0 -OP0 OP4 -OP4 -MRESET
[0:00.0u 0:00.0s 35k]
: outputs bout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
No flow through FET: g=dlatch_1/inv_0[1]/a, s=GND, d=fsum, loc=-310,180
No flow through FET: g=dlatch_1/inv_0[1]/a, s=Vdd, d=fsum, loc=-310,190
[0:00.0u 0:00.0s 35k]
: set 0 ph1
[0:00.0u 0:00.0s 35k]
: set 1 -ph1
[0:00.0u 0:00.0s 35k]
: set 0 OP4
[0:00.0u 0:00.0s 35k]
: set 1 -OP4
[0:00.0u 0:00.0s 35k]
: delay fsum -1 0
(9 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node bout is driven low at 6.23ns
      ...through fet at (-192, 190) to inv_3/z
      ...through fet at (-268, 180) to GND after
    inv_3/a is driven high at 1.15ns
      ...through fet at (-286, 190) to Vdd after
    fsum is driven low at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs bin fsum ph1 -ph1 OP0 -OP0 OP4 -OP4 -MRESET
[0:00.0u 0:00.0s 35k]
: outputs bout
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
No flow through FET: g=ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-334,180
    Maybe you haven't marked all the inputs and outputs?
Node doesn't drive anything: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
Node isn't driven: sumin (see source at -340,190)
    Maybe you haven't marked all the inputs and outputs?
No flow through FET: g=-ph1, s=sumin, d=dlatch_1/inv_0[0]/a, loc=-340,190
No flow through FET: g=dlatch_1/inv_0[1]/a, s=GND, d=fsum, loc=-310,180
No flow through FET: g=dlatch_1/inv_0[1]/a, s=Vdd, d=fsum, loc=-310,190
[0:00.0u 0:00.0s 35k]
: set 0 ph1
[0:00.0u 0:00.0s 35k]
: set 1 -ph1
[0:00.0u 0:00.0s 35k]
: set 0 OP4
[0:00.0u 0:00.0s 35k]
: set 1 -OP4
[0:00.0u 0:00.0s 35k]
: delay fsum 0 -1
(7 stages examined.)
[0:00.0u 0:00.0s 35k]
: critical
Node bout is driven high at 8.94ns
      ...through fet at (-192, 180) to inv_3/z
      ...through fet at (-268, 190) to Vdd after
    inv_3/a is driven low at 2.70ns
      ...through fet at (-280, 180) to nand_2_2/6_14_20#
      ...through fet at (-286, 180) to GND after
    fsum is driven high at 0.00ns
[0:00.0u 0:00.0s 35k]
: clear
[0:00.0u 0:00.0s 35k]
: inputs sumin ph1 -ph1
[0:00.0u 0:00.0s 35k]
: outputs fsum
[0:00.0u 0:00.0s 35k]
: watch fsum
[0:00.0u 0:00.0s 35k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
[0:00.0u 0:00.0s 35k]
: set 1 ph1
[0:00.0u 0:00.0s 35k]
: set 0 -ph1
[0:00.0u 0:00.0s 35k]
: delay sumin -1 0
(15 stages examined.)
[0:00.0u 0:00.0s 39k]
: critical 1w
Node fsum is driven low at 5.57ns
      ...through fet at (-310, 180) to GND after
    dlatch_1/inv_0[1]/a is driven high at 4.11ns
      ...through fet at (-322, 190) to Vdd after
    dlatch_1/inv_0[0]/a is driven low at 3.00ns
      ...through fet at (-340, 190) to sumin after
    sumin is driven low at 0.00ns
[0:00.0u 0:00.0s 39k]
: clear
[0:00.0u 0:00.0s 39k]
: inputs sumin ph1 -ph1
[0:00.0u 0:00.0s 39k]
: outputs fsum
[0:00.0u 0:00.0s 39k]
: watch fsum
[0:00.0u 0:00.0s 39k]
: check
Marking transistor flow...
Setting Vdd to 1...
Setting GND to 0...
[0:00.0u 0:00.0s 39k]
: set 1 ph1
[0:00.0u 0:00.0s 39k]
: set 0 -ph1
[0:00.0u 0:00.0s 39k]
: delay sumin 0 -1
(8 stages examined.)
[0:00.0u 0:00.0s 39k]
: critical 1w
Node fsum is driven high at 8.35ns
      ...through fet at (-310, 190) to Vdd after
    dlatch_1/inv_0[1]/a is driven low at 6.89ns
      ...through fet at (-322, 180) to GND after
    dlatch_1/inv_0[0]/a is driven high at 5.78ns
      ...through fet at (-334, 180) to sumin after
    sumin is driven high at 0.00ns
[0:00.0u 0:00.0s 39k]
[0:00.0u 0:00.0s 39k]
: [0:00.1u 0:00.1s 39k] Crystal done.