|M.E.E. Program Information||ECE Areas of Study|
|ELEC 698 Seminar||Guidelines for Independent Study|
|Academic Advisors||Grades and Academic Status|
The M.E.E. is a terminal, non-thesis degree intended primarily for students who wish to strengthen their academic background through three or four semesters of additional coursework. The M.E.E. program is a bridge to industry, designed to provide advanced learning and training in the applied aspects of ECE technology beyond the typical undergraduate electrical and computer engineering degree program.
Upon matriculation, the M.E.E. student selects a faculty advisor in his/her primary area of interest (See “ECE Areas of Study” in this section). The advisor will counsel the student in developing a degree plan consistent with the student’s career objectives.
Coursework is based on the student’s degree plan. The M.E.E. degree plan must include:
At least 30 credit hours comprised of 10 courses of at least 3 hours each: Major area (18 hours); Minor Area (6 hours); Electives (6 hours)
All of the 10 required courses must be 500 level or higher
No ELEC 590 may count for major area or minor area
ELEC 698 for each semester
Electives may be fulfilled through research (ELEC 590), other ECE electives, or through courses available through affiliated departments in areas such as Communication Training or Engineering Leadership Management, including, but not limited to:
ENGI 505 (3) Engineering Project Management and Economics
ENGI 510 (3) Technical and Managerial Communications
NSCI 511 (3) Science Policy and Ethics
ENGI 528 (3) Engineering Economics
ENGI 529 (3) Ethics and Engineering Leadership
ENGI 610 (3) Management for Science and Engineering
ENGI 615 (3) Leadership Coaching for Engineers
Students may be eligible to transfer up to three hours of course credit from another university. Rice undergraduates entering the M.E.E. program may transfer 500-level course credit not applied to their undergraduate degrees, with the approval of the ECE Professional Masters Committee and Office of the Registrar. See the ECE M.E.E. Administrator for details.
The M.E.E. may be pursued on a part-time or full-time basis. A 3.0 GPA must be maintained in major and minor coursework. Only courses in which a grade of C or above is achieved will be counted towards the M.E.E. degree. Students whose GPA falls below a 2.33 will be placed on academic probation by the university. Students whose GPA falls below a 3.0 will be placed on academic probation by the ECE Department. Students must maintain continuous program enrollment and involvement unless granted an official leave of absence. For more information see the GA: ga.rice.edu.
Forms may be found here.
The ELEC 698 Seminar course broadens M.E.E. students’ exposure to activities and opportunities in all fields of electrical engineering, both in industry and research settings. All M.E.E. students are required to take and successfully complete ELEC 698 for each semester in residence. The course requires registered attendance at 3 ECE sponsored or co-sponsored seminars per semester, and at the featured departmental events described in the following paragraph. Details of seminars are emailed and posted on the ECE website at ece.rice.edu. Some seminars hosted by the Engineering Professional Master’s Program (EPMP) can count for 1 of the 3 seminars. Please check with the M.E.E. Administrator for a list of approved seminars. Students are responsible for signing in during the first 10 minutes of the seminar. Attendance logged after that time will not be counted. If there are any difficulties with signing in, students should contact the M.E.E. Administrator within 24 hours of the seminar.
In addition to attendance at 3 seminars, ELEC 698 requires that each student attend and sign-in for the following events: ECE Corporate Affiliates Day, the Brice Distinguished Lecture, and the Chapman Distinguished Lecture, in the years they are held. These featured departmental events provide each M.E.E. student excellent opportunities to expand his/her professional network by interacting with alumni and industrial affiliates of the ECE department. Corporate Affiliates Day is scheduled for April 3, 2020 and attendance is required. Exceptions must be approved and signed off by the M.E.E. Administrator. Reasonable exceptions include work obligations, travel for job interviews, etc.
Each incoming M.E.E. student selects an academic advisor, usually a member of the Professional Master’s Committee, to help with course selection and other initial academic concerns. Final course selection does not need to be completed until after the start of classes, but must be completed before the Add deadline, typically the Friday of the second week of classes.
The ECE Department has five interdisciplinary areas of study that the M.E.E. student can choose from:
The Computer Engineering group at Rice University has a long track record of innovative research in physical modeling and characterization, VLSI signal processing, computer architecture, computer-aided design, and storage and network systems. Spanning the spectrum of computing from low-power personal devices to large-scale parallel information systems, networked computing solves a myriad of technology challenges. Future computing technologies include the on-chip integration of systems and networks.
Data scientists seek to collect and understand the structure in data, looking for compelling patterns, telling the story that is buried in the data. They get at the questions at the heart of complex problems and devise creative approaches to making progress in a wide variety of application domains. This is an emerging discipline that integrates: tools and techniques involving data acquisition; data analytics and data storage; and computing infrastructure in order to enable extraction of meaningful information from massive data sources.
The brain is essentially a circuit. Neuroengineering is a discipline that exploits engineering techniques to understand, repair and manipulate human neural systems and networks. At Rice, we develop technologies to understand, repair, replace, enhance, or treat the diseases of the nervous system. We also design, construct and study devices that interface with living neural tissue. Rice is uniquely positioned as a leader in the field thanks to the broad, interdisciplinary research performed in conjunction with the world’s largest medical center (Texas Medical Center), steps away from the Rice University campus.
Photonics, Electronics and Nano-devices:
The focus of this program is the improved understanding of electronic, photonic, and plasmonic materials, optical physics, the interaction of light and matter, along with the application of that knowledge to develop innovative devices and technologies. The specific areas of interest cover a broad range, including: nanophotonics and plasmonics; studies of nanomaterials and magnetically active materials; imaging and image processing, including multispectral imaging and terahertz imaging; ultrafast spectroscopy and dynamics; laser applications in remote and point sensing; single-molecule transistors; and applications of Nanoshells in biomedicine.
Rice is a leader in Digital Signal Processing. Signal Processing is the analysis and transformation of signals in order to understand, simplify, or recast their structure. The understanding of how to analyze and restructure signals is applied to a wide range of areas, including: image and video analysis; computational neuroscience; statistical signal processing, pattern recognition, and learning theory; communication systems; and high-performance, scalable wireless internet.
Students must register for courses using ESTHER which is the web application for students, faculty and staff. Students will use this application to register for classes and retrieve certain data such as grades and account information. For information about how to use ESTHER see Section II or: registrar.rice.edu/students/esther_FAQs/
ELEC 590 - Graduate Non-Thesis Research Projects is intended for M.E.E. students who wish to undertake specific research projects under the direction of a faculty member. The parameters of the research project and grade determination should be discussed with the faculty member prior to enrollment. A brief abstract describing the proposed research should be approved by the faculty advisor and submitted to the faculty advisor and M.E.E. Program Administrator before registering for the course. The form may be found at ece.rice.edu/eceforms/aspx. A maximum of 3 credits of ELEC 590 can be applied to the M.E.E. degree as an elective course.
ELEC 591 - Vertically Integrated Projects at Rice University (VIP)
The (VIP) Program at Rice unites graduate and undergraduate education and faculty research in a team-based context. Students interested in VIP projects should meet and consult with the faculty lead of that project. Visit vip.rice.edu for more information.
Grades—According to university guidelines, students must achieve at least a B- (2.67) grade point average (GPA) in courses counted toward the graduate degree. A 3.0 GPA must be maintained in major and minor coursework. The ECE Department adds the requirement that only courses in which a grade of C or above was earned will count towards the graduate degree. Students whose cumulative GPA falls below a 2.67, or whose semester GPA falls below a 2.33, will be placed on academic probation by the university. Students whose GPA falls below a 3.0 will be placed on academic probation by the ECE Department. To compute GPA, the credits attempted in semester hours for each course and the points for the grade earned (from A+ = 4.33 to F = 0.00) are multiplied, then the products (one for each course) are added together, and the sum is divided by the total credits attempted.
Pass/Fail—For the M.E.E. degree, elective courses taken outside the ECE department that do not count toward the student’s major or minor coursework may be taken Pass/Fail. Students must file a course as Pass/Fail no later than the end of the 10th week of classes; however, they may later convert a Pass/Fail to a graded course by filing the appropriate paperwork with the Office of the Registrar. Students should be aware that while a grade of “P” does not affect their GPA, a grade of “F” does.
Satisfactory/Unsatisfactory—In the ECE Department, the faculty may assign a grade of “S” or “U”. ELEC 698, Research and Thesis, is such a course. Students should be aware that while a grade of S or U does not affect their GPA, no credit is awarded if a grade of U is received. Courses with a grade of S will count towards total credits earned.
Incomplete (INC)—For an INC received in the fall semester, students must complete the work by the end of the first week of the spring semester or an earlier date as defined by the instructor, and instructors must submit a revised grade by the end of the second week. For an INC received in the spring or summer semester, students must complete the work before the start of the fall semester or an earlier date as defined by the instructor, and instructors must submit a revised grade by the end of the first week. If a grade is not submitted by the appropriate deadline, the INC will be automatically converted to a failing grade.
Audit (AUD)—The grade designation of “AUD” is used for people auditing a course, and specifically when the auditing student has met the audit requirements of the course. A grade designation of “NC” (no credit) is given to students who do not meet the audit requirements. Requests to audit a class or to change from audit to credit or vice versa must be done by the end of the second week of the semester.