ELEC 240 Lab

Deliverables

To complete this lab, you need to develop 4 things:

  • a working EMG device
  • a polished Labview interface
  • a lab report
  • a product demo

where the device is described in the Project Specification and the rest are described below.

Labview Interface

The Labview interface can be as detailed as you like but the minimum requirements are:

  1. User-friendly look

  2. Time-domain waveform with averaging capability (for smoother waveform).

  3. Voltage threshold indication

  4. Frequency-domain waveform with information on what frequencies are being seen

  5. Additional filtering ability (500Hz LPF)

Final Report and Demo

After you have created your working EMG, write up a lab report (in the same format as previous lab reports) and submit one final report per lab group.

You will also schedule a 5-min demo for the last week of classes. Walk us through the design, the Labview interface, any problems you encountered, and be ready to answer a few questions about your project.